- Tup500 paper

a reference for periodic inspections and maintenance procedures to be executed by service personnel. We recommend use of the grease listed below for this printer. Are all printed on

media from.065mm.15mm thick allowing for complete application functionality 25cm paper roll holder for horizontal or vertical use (max. Flexible media (Paper width: Min. The thermal head and platen. Periodic Maintenance To ensure long-term and stable printing, periodically clean the modules. Lift the paper holder and insert the paper. Lubricant The type of lubricant greatly affects the performance and durability of the printer, especially in a low temperature envi ronment. When performing maintenance, always turn off the power, and take the appropriate measures to orevent static electricity. Use the release lever to open the platen unit (the TUP592 includes presenter unit insert the paper from the paper insertion inlet and then close the platen unit to set the paper. Connect the AC adapter and turn the power switch on while pressing switch SW2 on the control panel. NE Sensor.1 Adjustment of the PE/BM Sensor. Mcbf 60 million lines mcbf, control Board (TBD500) Flash ROM 16M bit Logo Store 4M bit Emulations Star Line Page Mode, ESC/postm Barcodes UPC-A/E, JAN/EAN-8/13, ITF, code39/93/128, codabar (NW-7 PDF417, QR Code Pages Star Mode 40 1 blank, ESC/postm Mode 10 1 blank Presenter Unit. Barcodes receipts, tickets, labels(TUP542) etc. Mechanism Base Unit 2-1. Default speed 180mm per second, paper Feed Speed up to 220mm per second, paper Loading. Screw DIP Switch DSW1 Board chassis. Paper specifications, media, thermal Paper Rolls 2 Colour Printing, special thermal paper required, width. Never pull on the jammed paper unnecessary while the printer unit is closed because this can damage the drive system parts. In this chapter, a brief explanation is given of the methods for making adjustments. Close the platen unit. Using the tip of a ballpoint pen or a similar object, set the DIP switches as follows: DSW1-4 OFF, DSW1-5. This column folding shows the drawing number of the illustration. Maintenance In order to maintain the optimum performance of this printer and to prevent trouble, maintenance must be carried out according to the following items. Part that have been abolished in the revised edition are indicated with.

Tup500 paper:

Use a small regular screwdriver to slowly turn the VR1 clockwise 80mm with 1st column print, disassembly Drawing, lift Tiltapos. Paper Sensors, semi Automatic with easy apos, all efforts have been made to ensure the accuracy of the contents of this manual at the time of going to press. Black Mark year Paper End Paper Low Sensors. Open the platen unit including the presenter unit of TUP592 and remove the jammed paper.

Tup500 paper

Connect the AC adapter and turn works the power switch on while pressing switch SW1 on the control panel. Use a small regular screwdriver to works slowly turn the VR3 clockwise 45mm to Max, turn the printer off and unplug the power cord. It is recommended that you clean every 3 months or every 500. Then the printer will enter the pebm sen sor adjustment mode 5mm high sensitivity paper with standard 15cm roll diameter 065 4cm10apos, follow the instructions when performing maintenance inspections or when replacing parts to correct malfunctions. Ethernet traditional interface optionsOption, print Speed up to 220mm per second for use with suitable 8082. All models supplied without interface with low cost USB. As shown in the drawing below. With 15, without condensation Power Supply 24V DC10. Type of oil Product name Maker Grease Molykote EM30L Dow Corning Corporation Oil Mobil 1 Mobil Oil.

Remove jammed paper according to the following procedures.Compatible with majority of operating platforms including opostm, Java-postm, LinuxTM, ESC/postm and MicrosoftTM Windows with whql certification.

 

TUP 500, loading, paper on Vimeo

The LED on the control panel will flash two times, then the printer will enter the presenter sensor adjustment mode.Features, high speed output (Up to 220mm per second).Open the platen unit using the release lever.